ELLIS – WOMEN'S STREET MESH RIDING JACKET ( RED )
Couldn't load pickup availability
Quality Assurance
Expert Support
Fast & Reliable Delivery
Payment details
All engines go! Place your order, we’ll handle the payment flow.
Things to keep in mind to ensure the measurements are taken correctly - It will be helpful to have a family member or a friend take the measurements - Please use flexible tape only, like a tailor’s tape - All the measurements must be in the same units, whether cm or inches - You should preferably be wearing base layers while taking measurements, and avoid anything bulky 
STEP 1 -
Measure using a tailor's tape There are two key measurements that you need to take into consideration for figuring out your jacket size.
How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place while on the motorcycle
If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Ellis is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.
STEP 1 -
Confirm that the armours are in the correct position The jacket fit should be such that the armours are in the anatomically correct position. Since we are all unique, this could mean that the elbow armour might be slightly off in some cases depending on length of your arms.
STEP 2 -
Ensure the armours are properly positioned. - In case the jacket fit is correct but the elbow armour is slightly off, use the cinching mechanism to adjust the elbow armour and bring it closer to your body. - To do so, first make sure the ladderlock is not on the same line as the webbing. Pull the ladderlock slightly away from the body, and simply pull it away from the loop to tighten or towards the loop to loosen. You also have cinch straps on the hips for adjustment. Click here to watch a video explaining these steps
IMPORTANT NOTE: Body armours/ protectors must always be removed before starting the washing process
CLEAN & CARE:
For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER) DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent Do not place your jacket near, or come in contact with a direct heat source Dry the jacket on a hanger away from direct sunlight where there is good ventilation. Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax
STORAGE:
Make sure your jacket is completely dry before you store it on a hanger. If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage Do not store the jacket in air-tight plastic bags
A) Chest - Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist - Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight. C) Hips - Measure the circumference of your hips over the widest part. Keep the tape parallel to the ground, not too loose or too tight.
STEP 2 -
Find your jacket size by checking measurements against the size chart provided - If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size. - If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.
Remember, each brand has its own body size charts, so do check the chart before you select the size. Click here to watch a video explaining these steps
1. Order Processing:
All orders placed on Moto Marvels are processed within 1–2 business days after payment confirmation.
2. Shipping Methods:
We offer standard shipping options for delivery across India.
3. Estimated Delivery Time:
Orders are typically delivered within 5–10 business days from the date of order confirmation, depending on your location.
🛠️ Built for Riders, by Riders
Every product at Moto Marvels is designed with precision and passion by biking enthusiasts who understand what your ride truly needs.
🔩 Premium Quality, Always
We use top-grade materials like mild steel to ensure durability, performance, and a perfect fit — no cheap shortcuts, ever.
⚙️ Perfect Fit Guarantee
Engineered for your ride, our accessories blend seamlessly with your bike.
🚚 Fast & Reliable Shipping
Orders ship within 1–2 business days with tracking. We’ve got your back, right from checkout to installation.
📞 Dedicated Support
Need help? Call or WhatsApp us at +91 80762 75305 — real humans, real support, no bots.
🎯 Free Gear Consultation
Not sure what’s best for your bike? Get a free consultation from our pros to choose the perfect gear for your ride.
